Petition Summaries

On May 31, 2017, Petitioner Whirlpool Corporation filed a Petition for Global Safeguard Relief Pursuant to Sections 201-202 of the Trade Act of 1974 on imports of Large Residential Washers. 

SCOPE OF INVESTIGATION

The imported products covered by this Petition are all large residential washers and certain parts thereof, which is the same product scope covered by the recently completed antidumping investigation of Large Residential Washers from China. For purposes of this petition, the term “large residential washers” denotes all automatic clothes washing machines, regardless of the orientation of the rotational axis, with a cabinet width (measured from its widest point) of at least 24.5 inches (62.23 cm) and no more than 32.0 inches (81.28 cm), except as noted below.

On May 31, 2017, Petitioners DAK Americas LLC, Nan Ya Plastics Corporation, America, and Auriga polymers Inc. filed a petition for the imposition of antidumping duties and countervailing duties on imports of Fine Denier Polyester Staple Fiber from China, India, Korea, Taiwan, and Vietnam.

On April 27, 2017, Petitioner The Boeing Company filed a petition for the imposition of antidumping and countervailing duties on imports of 100-to 150-Seat Large Civil Aircraft from Canada.

SCOPE OF THE INVESTIGATION

The merchandise covered by this petition is aircraft that have a standard 100- to 150-seat two-class seating capacity and a minimum 2,900 nautical mile range, as these terms are defined below.

On April 26, 2017, Petitioner Suniva, Inc. filed a Petition for Global Safeguard Relief Pursuant to Sections 201-202 of the Trade Act of 1974 on imports of Crystalline Silicon Photovoltaic Cells and Modules (Solar Cells).

SCOPE OF INVESTIGATION

The merchandise covered by this petition is crystalline silicon photovoltaic cells, and modules, laminates, and panels, consisting of crystalline silicon photovoltaic cells, whether or not partially or fully assembled into other products, including, but not limited to, modules, laminates, panels and building integrated materials.

On April 19, 2017, Petitioners ArcelorMittal Tubular Products, Michigan Seamless Tube, LLC, PTC Alliance Corp., Webco Industries, Inc., and Zekelman Industries, Inc. filed a petition for the imposition of antidumping duties and countervailing duties on imports of Certain Cold-Drawn Mechanical Tubing of Carbon and Alloy Steel from China, Germany, India, Italy, Korea, and Switzerland.

On April 11, 2017, Petitioners Waterloo Industries Inc. filed a petition for the imposition of antidumping duties and countervailing duties on imports of Certain Tool Chests and Cabinets from the People’s Republic of China and the Socialist Republic of Vietnam.

SCOPE OF THE INVESTIGATION

The scope of this petition covers certain metal tool chests and tool cabinets with drawers (“tool chests and cabinets”) from the People’s Republic of China and the Socialist Republic of Vietnam. The scope covers all metal tool chests and cabinets, including top chests, intermediate chests, tool cabinets and side cabinets, storage units, mobile work benches, and work stations and that have the following physical characteristics:

On March 31, 2017, Petitioners North American Steel & Wire, Inc./ISM Enterprises filed a petition for the imposition of antidumping duties on imports of Carton-Closing Staples from the People’s Republic of China.

SCOPE OF THE INVESTIGATION

The scope of this investigation is carton-closing staples. Carton-closing staples are fastening devices used to secure or close the flaps of corrugated and solid paperboard cartons and boxes. Carton-closing staples are manufactured from steel wire, and commonly have a copper-coating or a zinc (galvanized) coating. Carton-closing staples manufactured from stainless steel wire are also covered.

On March 28, 2017, Petitioners Charter Steel, Gerdau Ameristeel US Inc., Keystone Consolidated Industries, Inc., and Nucor Corporation filed a petition for the imposition of antidumping duties and countervailing duties on imports of Carbon and Alloy Steel Wire Rod from Belarus, Italy, the Republic of Korea, the Russian Federation, the Republic of South Africa, Spain, Turkey, Ukraine, United Arab Emirates, and the United Kingdom.

SCOPE OF THE INVESTIGATION

The merchandise covered by these investigations are certain hot-rolled products of carbon steel and alloy steel, in coils, of approximately round cross section, less than 19.00 mm in actual solid cross-sectional diameter. Specifically excluded are steel products possessing the above-noted physical characteristics and meeting the Harmonized Tariff Schedule of the United States (HTSUS) definitions for (a) stainless steel; (b) tool steel; (c) high-nickel steel; (d) ball bearing steel; or (e) concrete reinforcing bars and rods. Also excluded are free cutting steel (also known as free machining steel) products (i.e., products that contain by weight one or more of the following elements: 0.1 percent or more of lead, 0.05 percent or more of bismuth, 0.08 percent or more of sulfur, more than 0.04 percent of phosphorous, more than 0.05 percent of selenium, or more than 0.01 percent of tellurium). All products meeting the physical description of subject merchandise that are not specifically excluded are included in this scope.

On March 23, 2017, Petitioners the National Biodiesel Board Fair Trade Coalition and its individual members filed a petition for the imposition of antidumping duties and countervailing duties on imports of Biodiesel from Argentina and Indonesia.

SCOPE OF THE INVESTIGATION

The product covered by these petitions is biodiesel, which is a fuel comprised of mono-alkyl esters of long chain fatty acids derived from vegetable oils or animal fats, including waste oils or greases, and other biologically-based oil or fat sources. The petitions cover biodiesel in pure form (“B100”) as well as fuel mixtures containing at least 99 percent biodiesel by volume (“B99”). For fuel mixtures containing less than 99 percent biodiesel by volume, only the biodiesel component of the mixture is covered by the scope of the petitions.

On March 9, 2017, Petitioners the Aluminum Association Trade Enforcement Working Group filed a petition for the imposition of antidumping duties and countervailing duties on imports of Certain Aluminum Foil from the People’s Republic of China.

SCOPE OF THE INVESTIGATION

The merchandise covered by this investigation is aluminum foil having a thickness of 0.2 mm (0.00787 inches) or less, in reels exceeding 25 pounds, that is not backed, etched for use in capacitors, or cut to shape. Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above. The products under investigation are currently classifiable under Harmonized Tariff Schedule subheadings 7607.11.3000, 7607.11.6000, 7607.11.9030, 7607.11.9060, 7607.11.9090, and 7607.19.6000. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this proceeding is dispositive.